The MicroBio MB1 bio aerosol sampler is the simplest to use and most economical microbial air sampler of its kind.
The MicroBio MB1 bioaerosol sampler is capable of using both a 90mm petri dish (400 and 220 hole head versions) or 55 mm contact plates (only 220 hole head version). Using standard readily available consumables at a low cost with a variety of media makes the MicroBio MB1 an economical instrument to use. The MicroBio MB1 air sampler is ideal for providing an early warning of issues in environments such as a high risk food factory and for sampling the air for allergen transfer. The MB1 now features a delay start feature to allow the air sampling to commence only when all personnel have left the area being sampled.
Supplied with the MB1 Bio aerosol Sampler:
- Petri dish and contact plate spring sets
- Stainless steel sampling head
- Printed operating manual
- Padded carry bag
- Multi-voltage world-wide charger with international plugs and 12V in-car plug
- Ansmann maxE NiMH cells – pre-charged so the MB1 is ready to use out of the box
- Certificate of Calibration
NB - Please note petri dishes are not included
Downloads
To support your use of the MB1 bioaerosol sampler, the operating instructions, spreadsheets to help analyse the results and documentation templates for qualification can be found on the 'View Product Downloads' link.
Sampling Head Option
The MicroBio MB1 can be purchased with the option of one of two types of sampling heads (Please indicate which type is preferred when ordering). The MicroBio MB1 will be calibrated for use with the selected head. If swapping to another head type, the MicroBio MB1 must be re-calibrated.
220 x 1 mm hole stainless steel head
This is the standard head sold with the MicroBio MB1 air sampler. It is designed as a dual purpose head for both 55/60mm contact plates or up to 90mm Petri dishes. The d50 cut-off point of 1.7 um and has a jet velocity of 9.63 m/s. It is the ideal head for general purpose sampling of air quality within food manufacturing environments.
![220 Hole Sampling Head](https://i1.wp.com/www.cantiumscientific.com/wp-content/uploads/2014/04/shapeimage_8-1.png?resize=156%2C99&ssl=1)
MicroBio 220 Hole Sampling Head
400 x 0.7 mm hole anodised aluminium head
Available as a no-cost option, this head provides full coverage of 90mm Petri dishes with a d50 point of 1.35 um and air jet velocity of 10.7 m/s. These heads are ideal for use in areas needed higher sensitivity of collection.
![400 Hole Sampling Head](https://i1.wp.com/www.cantiumscientific.com/wp-content/uploads/2014/04/shapeimage_9.png?resize=153%2C100&ssl=1)
MicroBio 400 Hole Sampling Head